Click on the Erase tab. Select the format – Mac OS Extended (HFS+), MS-DOS (FAT32), or exFAT – then name the drive. Click the Erase button and the drive will start formatting. Be aware that formatting a drive deletes all of the files on it, so back up anything important before completing this step. Format a drive using Windows. FAT (MS-DOS) and exFAT: the system systems that are supported by both Mac & Windows. So you may ask what are the differences between APFS and Mac OS Extended, right? The following content first discusses on APFS vs Mac OS Extended; after that, it will tell you how to format a hard drive for Mac in several different ways. One is to use a paid 3rd party tool to add NTFS write support to a Mac, such as Paragon’s NTFS for Mac tool. The other is to format your drives with the exFAT file system. This file system can be read and written by both Mac and Windows with support for single files of up to 128 petabytes!
SD card comes with various form factors like micro SD, SDHC, SDXC, etc. and they are used in multiple devices such as digital camera, camcorder, DSLR, drones, android phone, etc. to expand the memory space. If you are looking to format SD card on Windows or Mac then, this could be due to various reasons. Before you format SD card on Windows or Mac, it is suggested to take a backup of SD card data to avoid permanent data loss scenario.
In this article, you will find out the highly rated method to format SD card on Windows and Mac along the proven method to recover data from corrupt or formatted SD card.
Common reasons for SD card Formatting
Formatting an SD card is essential and there is nothing scary about it.
- To improve SD card performance and functioning.
- To erase all duplicate and unwanted photos, files, etc. from memory card.
- If you are unable to delete files from SD card.
- To change SD card file system to NTFS, FAT32, exFAT, etc.
- SD card is not readable on Windows, Mac, or Android phone.
- SD card errors like SD card formatting error, memory card inaccessible, blank SD card, etc.
Prerequisites before formatting an SD card
Whenever you have made up your mind to format an SD card or any external storage device, the most important thing before formatting an SD card is taking a backup of important files and photos.
Formatting an SD card erases complete data. Therefore it is recommended to take a backup of all important photos, raw-images, videos, audio files, Microsoft Office files, documents, etc.
When your SD card is not readable or corrupt, then taking a backup of important files or photos becomes highly impossible. However, with the help of the Remo Recover tool, you can restore all your data from SD card with ease.
Utilize Remo SD card Recovery tool to restore more than 300 file formats like photos, videos, raw-images, documents, etc. This tool is available for both Windows and Mac operating systems including Windows 10, 8.1, 8, 7, etc, and the latest macOS Big Sur, Catalina, Mojave, etc. Remo Recover tool easily recovers data from formatted SD card, corrupted or unreadable SD card, external hard drive, SSD, pen drive, etc.
Format SD card on Mac and Windows Successfully
How to Format SD card on Mac?
Before you format your SD card on Mac, connect your micro/ SD card to Mac using a card reader and then, take a backup of important files or utilize Remo Recover Mac tool to restore data.
- Go to Applications > Utilities > Disk Utility
- Select the SD card which you want to format from all the available drives and click the Erase option.
Note: In case, if you don’t find your SD card or external hard drive not showing up on Mac, then this could be due to either connection issue or Preference setting problem.
- Now, give a new name to your SD card (optional).
- Click Format option to choose the format type you want to perform on it.
Note: Select exFAT if your SD card is 64GB and want to make it compatible with both Windows and Mac. Otherwise, select MS-DOS (FAT) if your memory card is 32 GB.
- Click on the Erase option and wait until the Disk utility function erases complete files present on the SD card. This way you can successfully format your memory card on Mac.
- Now, safely eject the SD card from your Mac to start using it with better performance. In case, if you have deleted files from SD card on Mac without taking a backup then, you can make use of Remo SD card Recovery tool to restore files from SD card on Mac effortlessly.
How to Format SD card on Windows?
Before you format your micro/ SD card, make sure you take a backup of important SD card data. And also verify if the SD card is unlocked or not to avoid SD card not getting formatted error.
- Connect your SD card to Windows or Insert it into the SD card slot.
- Open This PC.
- You will find all your available drives under Devices and drives.
- Right-click on the SD card icon and click the Format option.
- Make changes in the Allocation unit size to Default allocation size.
- Click Start button to format your SD card
Some QuickNotes under Windows Formatting:
- Quick Format should be checked if you don’t prefer thorough formatting.
- You can rename your SD card under Volume label option.
- You can also select the file system which is compatible with your camera, mobile phone, DSLR, etc. FAT32 is selected for SD cards with 32 GB storage space, exFAT / NTFS for preferred for more than 32 GB storage drives.
USB drives are extremely convenient to use for carrying data around. Palm desktop for mac el capitan 10.11. They come in various capacity options, and easy to slip into your pocket or handbag, and they're far more durable than physical disks such as CDs, DVDs, and BDs. The only challenge with USB drives, however, is to know what file system to use when formatting them. This is especially important when holding big files or making bootable install disk.
The three most popular ones for formatting a USB drive are FAT32, NTFS, and exFAT, all of which are compatible with Windows-based computers as well as other devices. Let's look at each of these in detail and then get into how to format your USB drive with the appropriate file system on a Windows 10 PC.
File Allocation Table 32, shortened to FAT32, was introduced with Windows 95 and is one of the oldest of the Windows file systems in use today. It is also the most widely used file system in the world because of its compatibility with multiple devices like smart TVs and media players.
However, it has one limitation in that you can't store file sizes that are larger than 4GB. That's a hard limit so even if you have a file like a Windows 10 ISO that's about 4.1GB, you can't store it on a USB drive that has been formatted with the FAT32 file system. This file system is generally recommended if you need to use the USB drive with different types of hardware because of its wide compatibility.
NTFS is a Microsoft format that debuted with Windows NT, but it was only made available in consumer versions of Windows since Windows XP. The NT File system is the default one that your hard drive is formatted with when you install Windows. It offers several features that are neither found in FAT32 or exFAT, such as a change journal for recovery after errors or crashes, security using file permissions, encryption support, and more.
The biggest advantage is that the partition and file size limits are extremely high, which is the major difference between FAT32 and NTFS. The ideal use for these is for cloning system drives and other large chunks of data. It is compatible with Mac, Windows, and Linux, but doesn't work with the majority of other hardware devices.
exFAT, Extended File Allocation Table File System can be considered an upgrade to the conventional FAT32 format because it has higher size limits and is more lightweight. Incidentally, a larger number of hardware devices can be used with USB drives that are formatted with exFAT than with NTFS, making it a good alternative to FAT32. As such, if compatibility with other devices is a concern, it's a better option than NTFS.
Now that we have an overview of the basic differences between the three file systems, let's learn how to go about formatting a USB drive with one of them.
Format USB to FAT32/NTFS/exFAT in Windows 10 or Windows 7
The process is fairly simple and only involves a couple of clicks and menu option selections, but you will need to make sure that all the data on the drive is backed up before formatting it. By definition, formatting a drive erases all data on that drive, so be sure to back up any data that's already on the USB drive.
Once you have secured your data, follow the steps shown below to format your USB drive in Windows 10:
Step 1: Insert your USB drive into your Windows PC and open File Explorer.
Step 2: Right-click on the drive and select Format… from the contextual menu. A small window will pop up.
Step 3: Depending on what the purpose of the USB drive is, choose the appropriate file system. For greater compatibility, FAT32 is best, but if you want to put large media files, then exFAT is preferred. NTFS is great if you're only using the drive on other Windows systems. Your purpose of use should be the main deciding factor when picking a file system, considering each one's limitations on size limits vs. compatibility.
Step 4: Set the other parameters like Quick Format. When the box is not ticked, it will check for bad sectors, which is a good idea if your drive was corrupted before formatting.
Step 5: Click on Start, and your USB drive will be formatted to the file system that you selected in Step 3. Once you see 'Format Complete' on your screen, you can eject the drive and remove it from the computer. It is now ready to use.
How to Format USB to FAT32/exFAT on Mac
Creating Windows 10 bootable USB on Mac is a common task for people who have multiple computers at home. You have to format the drive to exFAT or FAT32 if the burning process failed due to the wrong partition scheme. The good news is that formatting USB on Mac is also as easy as on Windows 10.
Step 1: Insert the target USB drive into Mac and you should see the drive name on Finder sidebar.
Step 2: Find and open Disk Utility from Launchpad.
Exfat Or Ms-dos Fat For Mac And Windows
Step 3: Click on the USB drive name in Disk Utility app and click 'Restore' button displayed on the top menu. At this time, a couple of formatting options available. There are: Mac OS Extended, MS-DOS(FAT) and ExFAT.
Step 4: Select one of the format from drop-down menu and click 'Erase' to start formatting USB to FAT or ExFAT on Mac.
Exfat Or Msdos Fat For Mac And Windows 7
This is the easiest way to format your USB drive in Windows 10 or Mac. Alternatively, you can also use the DISKPART command line utility in Windows CMD to do this, but it requires some level of technical knowledge and is not generally recommended for new or inexperienced users.